[openstack-dev] [Tacker]
hyunsikYang
yangun at dcn.ssu.ac.kr
Thu Apr 23 12:13:38 UTC 2020
Hi.
for First error , You can modify code like below and it works.
outfile.write(ts_line.encode('utf-8','surrogatepass'))
For the second error, I can't see the error log. Please check above that
you captured.
thanks
2020년 4월 23일 (목) 오후 3:14, Ivandro <i201822117 at hust.edu.cn>님이 작성:
> Hello Mr. Hyunik,
>
> I try to run a new installation using the local.conf file that you suggest
> and the installation was not successful. here are additional information
> about my setup:
>
> - new installation and update ubuntu 18.04.4;
>
> - on vmware workstation, 8Gb RAM, 100G SSD HD, 4 vCPU;
>
> - local file and logs in attachment.
>
> - I used the same steps as described below (add user, download devstack,
> start the installation, ...)
>
> - before the installation, only the python3.6 was installed:
>
> *john at opestack:/lib$ ls /usr/bin/py**
> */usr/bin/py3clean /usr/bin/pydoc3.6 /usr/bin/pyjwt3
> /usr/bin/python3-jsonpointer /usr/bin/python3m*
> */usr/bin/py3compile /usr/bin/pygettext3 /usr/bin/python3
> /usr/bin/python3-jsonschema*
> */usr/bin/py3versions /usr/bin/pygettext3.6 /usr/bin/python3-jsondiff
> /usr/bin/python3.6*
> */usr/bin/pydoc3 /usr/bin/pyhtmlizer3 /usr/bin/python3-jsonpatch
> /usr/bin/python3.6m*
>
>
> - after the installation here are the python installation info:
>
> *john at DevstackMaster:~$ ls -la /usr/bin/python**
> *lrwxrwxrwx 1 root root 9 Apr 16 2018 /usr/bin/python -> python2.7*
> *lrwxrwxrwx 1 root root 9 Apr 16 2018 /usr/bin/python2 -> python2.7*
> *-rwxr-xr-x 1 root root 3637096 Apr 16 01:20 /usr/bin/python2.7*
> *lrwxrwxrwx 1 root root 9 Oct 25 2018 /usr/bin/python3 -> python3.6*
> *lrwxrwxrwx 1 root root 16 Oct 25 2018 /usr/bin/python3-config ->
> python3.6-config*
> *-rwxr-xr-x 1 root root 1018 Oct 29 2017 /usr/bin/python3-jsondiff*
> *-rwxr-xr-x 1 root root 3661 Oct 29 2017 /usr/bin/python3-jsonpatch*
> *-rwxr-xr-x 1 root root 1342 May 2 2016 /usr/bin/python3-jsonpointer*
> *-rwxr-xr-x 1 root root 398 Nov 16 2017 /usr/bin/python3-jsonschema*
> *-rwxr-xr-x 2 root root 4526456 Apr 18 09:56 /usr/bin/python3.6*
> *lrwxrwxrwx 1 root root 33 Apr 18 09:56 /usr/bin/python3.6-config ->
> x86_64-linux-gnu-python3.6-config*
> *-rwxr-xr-x 2 root root 4526456 Apr 18 09:56 /usr/bin/python3.6m*
> *lrwxrwxrwx 1 root root 34 Apr 18 09:56 /usr/bin/python3.6m-config ->
> x86_64-linux-gnu-python3.6m-config*
> *lrwxrwxrwx 1 root root 10 Oct 25 2018 /usr/bin/python3m ->
> python3.6m*
> *lrwxrwxrwx 1 root root 17 Oct 25 2018 /usr/bin/python3m-config ->
> python3.6m-config*
>
>
> It occurred two errors (Fie "ERROR ONE AND TWO.txt" in attachment: Here
> are the description:
> 1: on the first error, I changed line 98 on file *"/opt/stack/devstack/tools/outfilter.py"
> from **"*outfile.write(ts_line.encode('utf-8'))" to
> "outfile.write(ts_line.encode('utf-8','surrogatepass'))". then executed the
> command ./unstack, ./stack
>
> *Created symlink
> /etc/systemd/system/multi-user.target.wants/memcached.service →
> /lib/systemd/system/memcached.service.*
> *Traceback (most recent call last):*
> * File "/opt/stack/devstack/tools/outfilter.py", line 104, in <module>*
> * sys.exit(main())*
> * File "/opt/stack/devstack/tools/outfilter.py", line 98, in main*
> * outfile.write(ts_line.encode('utf-8'))*
> *UnicodeEncodeError: 'utf-8' codec can't encode characters in position
> 104-106: surrogates not allowed*
> *stack at DevstackMaster:~/devstack$*
>
>
> 2: here are the second error:
>
> +./stack.sh:main:796 PYPI_ALTERNATIVE_URL=
> +./stack.sh:main:796
> /opt/stack/devstack/tools/install_pip.sh
> bash: warning: setlocale: LC_ALL: cannot change locale (en_US.utf8)
> /opt/stack/devstack/.localrc.auto: line 2: 192.168.11.111: command not
> found
> ++./stack.sh:main:796 err_trap
> ++./stack.sh:err_trap:574 local r=127
> stack.sh failed: full log in /opt/stack/logs/stack.sh.log.2020-04-23-132112
> Error on exit
> stack at DevstackMaster:~/devstack$
>
>
> Hope you can help e solve this issue.
>
>
> BR
>
>
>
> On 4/23/2020 9:58 AM, hyunsikYang wrote:
>
> Hi. lvandro.
>
> I think you have a problem with os.
>
> Yesterday, I checked the master version of tacker using devstack. And It
> installed well.
>
> I used ubuntu 18.04 and used the master version devstack.
>
> I attached my local conf option like below. Please check it .
>
> If you have any questions, feel free to contact me and tacker ML.
>
>
> Thank you.
>
>
>
> ----------------------
> [[local|localrc]]
> HOST_IP= ip..
>
> ADMIN_PASSWORD=1111
> DATABASE_PASSWORD=$ADMIN_PASSWORD
> RABBIT_PASSWORD=$ADMIN_PASSWORD
> SERVICE_PASSWORD=$ADMIN_PASSWORD
> SERVICE_TOKEN=$ADMIN_PASSWORD
> IDENTITY_API_VERSION=3
>
> LOGFILE=$DEST/logs/stack.sh.log
> LOGDAYS=2
> LOG_COLOR=True
>
> ENABLE_DEBUG_LOG_LEVEL=false
>
> # Disable security groups
> Q_USE_SECGROUP=False
>
>
> #enable_plugin os-vif https://opendev.org/openstack/os-vif master
>
> ## kubernetes master node
> ##########################
> ## Loadbalance
> ##########################
> ## case of octavia
> LIBS_FROM_GIT+=python-octaviaclient
> ENABLED_SERVICES+=,octavia,o-api,o-cw,o-hm,o-hk
> enable_plugin octavia https://opendev.org/openstack/octavia master
> enable_plugin octavia-dashboard
> https://opendev.org/openstack/octavia-dashboard master
> # Increase Octavia amphorae timeout so that the first LB amphora has time
> to
> # build and boot
> #IMAGE_URLS+=",
> http://download.cirros-cloud.net/0.3.4/cirros-0.3.4-x86_64-disk.img"
> IMAGE_URLS+=",
> http://download.cirros-cloud.net/0.3.6/cirros-0.3.6-x86_64-disk.img"
>
>
> #!# kubernetes and docker environment
> enable_plugin kuryr-kubernetes
> https://opendev.org/openstack/kuryr-kubernetes master
> enable_plugin devstack-plugin-container
> https://opendev.org/openstack/devstack-plugin-container master
>
> #!# Etcd
> ENABLED_SERVICES+=,etcd3
>
> #!# Kubernetes-master
>
> ENABLED_SERVICES+=,kubernetes-api,kubernetes-controller-manager,kubernetes-scheduler
>
> #!# Kubelet
> ENABLED_SERVICES+=,kubelet
>
> #!# Kuryr watcher
> ENABLED_SERVICES+=,kuryr-kubernetes
>
> #!# Kuryr Daemon
> ENABLED_SERVICES+=,kuryr-daemon
> KUBERNETES_VIM=True
>
>
>
> # Tacker
> enable_plugin heat https://opendev.org/openstack/heat master
> enable_plugin networking-sfc https://opendev.org/openstack/networking-sfc
> master
> enable_plugin barbican https://opendev.org/openstack/barbican master
> enable_plugin mistral https://opendev.org/openstack/mistral.git master
> enable_plugin tacker https://opendev.org/openstack/tacker.git master
> USE_BARBICAN=True
>
> # alarm
> enable_plugin ceilometer https://opendev.org/openstack/ceilometer master
> enable_plugin aodh http://opendev.org/openstack/aodh master
>
> disable_service tempest swift
>
> [[post-config|$OCTAVIA_CONF]]
> [controller_worker]
> amp_active_retries = 9999
>
> [[post-config|$NEUTRON_DHCP_CONF]]
> [DEFAULT]
> enable_isolated_metadata = True
>
>
>
>
>
> 2020년 4월 23일 (목) 오전 3:30, Ivandro <i201822117 at hust.edu.cn>님이 작성:
>
>> Hello Mr. Yasufumi,
>>
>> Sorry for later replay. I will be replaying to your feedback timely.
>>
>> hope to have your support and if possible, guide on how to
>> troubleshooting.
>>
>> here are my scenario:
>>
>> I want to install tacker project using the following guide:
>> https://docs.openstack.org/tacker/train/install/devstack.html
>>
>> My environment info: 2 ubuntu server 18.04.4 LTS, VMWare workstation, 6G
>> RAM, 100G SSD HD, 2vCPU.
>>
>> Am trying to install both master branch and stable/train, on each
>> server. Please find in attachment the local.conf file used for each
>> installation..
>>
>> MASTER BRANCH REPORT:
>>
>> Commands used:
>>
>> ##User add
>> sudo useradd -s /bin/bash -d /opt/stack -m stack
>> echo "stack ALL=(ALL) NOPASSWD: ALL" | sudo tee /etc/sudoers.d/stack
>> sudo su - stack
>>
>> ##Download openstack Train branch
>> git clone https://opendev.org/openstack-dev/devstack -b stable/train
>> cd devstack
>> vi local.conf #Use the all in one config from manual page
>> ## RECLONE=yes
>>
>> ##Start installation
>> ./stack.sh
>>
>> ERROR INFO:
>>
>> ++/opt/stack/kuryr-kubernetes/devstack/plugin.sh:wait_for:552 die 'Timed
>> out waiting for Kubernetes API Server'
>> ++functions-common:die:193 local exitcode=1
>> [Call Trace]
>> ./stack.sh:1400:run_phase
>> /opt/stack/devstack/functions-common:1785:run_plugins
>> /opt/stack/devstack/functions-common:1752:source
>>
>> /opt/stack/kuryr-kubernetes/devstack/plugin.sh:1068:run_k8s_controller_manager
>> /opt/stack/kuryr-kubernetes/devstack/plugin.sh:643:wait_for
>> /opt/stack/kuryr-kubernetes/devstack/plugin.sh:552:die
>> [ERROR] /opt/stack/kuryr-kubernetes/devstack/plugin.sh:Timed out
>> Error on exit
>> nova-compute: no process found
>> neutron-dhcp-agent: no process found
>> neutron-l3-agent: no process found
>> neutron-metadata-agent: no process found
>> neutron-openvswitch-agent: no process found
>> full logs in attachment file master.rar
>>
>>
>>
>>
>> TRAIN BRANCH INSTALLATION:
>>
>> Commands used:
>>
>> ##User add
>> sudo useradd -s /bin/bash -d /opt/stack -m stack
>> echo "stack ALL=(ALL) NOPASSWD: ALL" | sudo tee /etc/sudoers.d/stack
>> sudo su - stack
>>
>> ##Download openstack Train branch
>> git clone https://opendev.org/openstack-dev/devstack -b stable/train
>> cd devstack
>> vi local.conf #Use the all in one config from manual page
>> ## RECLONE=yes
>>
>> ##Start installation
>> ./stack.sh
>>
>> then it return the following error:
>>
>> Obtaining file:///opt/stack/python-blazarclient
>> python-blazarclient requires Python '>=3.6' but the running Python is
>> 2.7.17
>> You are using pip version 9.0.3, however version 20.0.2 is available.
>> You should consider upgrading via the 'pip install --upgrade pip' command.
>> Error on exit
>> please find in attachment the full logs for this error in file named
>> train.rar
>>
>>
>> Please let me know if you need additional information.
>>
>>
>> BR
>>
>>
>>
>>
>> On 4/19/2020 4:38 AM, Yasufumi Ogawa wrote:
>> > Hi,
>> >
>> > Could you make a bug report for sharing your problem exactly if
>> possible?
>> >
>> > On 2020/04/18 12:51, Ivandro wrote:
>> >> Hello,
>> >>
>> >> I have been trying to install the tacker project in a VM, following
>> >> the instruction from this url:
>> >> https://docs.openstack.org/tacker/train/install/devstack.html based
>> >> on devstack but unsuccessful. Is there a link to download an already
>> >> installed VM with tacker?
>> > I'd like to confirm that we have already have such a VM, or can provide.
>> >
>> > Regards,
>> > Yasufumi
>> >
>> >>
>> >>
>> >> BR
>>
>
>
> --
>
> *----------------------------------------------------------------*
>
> *Hyunsik Yang (Ph. D candidate)*
>
> *DCN laboratory / School of Electronic Engineering*
>
> *Soongsil University *
>
> *511 Sangdo-dong Dongjak-gu*
>
> *Seoul, 156-743 Korea*
>
> *TEL : (+82)-2-820-0841 *
>
> *M.P: (+82)-10-9005-7439*
>
>
--
*----------------------------------------------------------------*
*Hyunsik Yang (Ph. D candidate)*
*DCN laboratory / School of Electronic Engineering*
*Soongsil University *
*511 Sangdo-dong Dongjak-gu*
*Seoul, 156-743 Korea*
*TEL : (+82)-2-820-0841 *
*M.P: (+82)-10-9005-7439*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20200423/bc1835fd/attachment-0001.html>
More information about the openstack-discuss
mailing list