[masakari] how to install masakari on centos 7

Vu Tan vungoctan252 at gmail.com
Mon Jul 8 14:21:16 UTC 2019


Hi Gaetan,
Thanks for pinpoint this out, silly me that did not notice the simple
"error InterpreterNotFound: python3". Thanks a lot, I appreciate it

On Mon, Jul 8, 2019 at 9:15 PM <gaetan.trellu at incloudus.com> wrote:

> Vu Tan,
>
> About "auth_token" error, you need "os_privileged_user_*" options into
> your masakari.conf for the API.
> As mentioned previously please have a look here to have an example of
> configuration working (for me at least):
>
> - masakari.conf:
>
> https://review.opendev.org/#/c/615715/42/ansible/roles/masakari/templates/masakari.conf.j2
> - masakari-monitor.conf:
>
> https://review.opendev.org/#/c/615715/42/ansible/roles/masakari/templates/masakari-monitors.conf.j2
>
> About your tox issue make sure you have Python3 installed.
>
> Gaëtan
>
> On 2019-07-08 06:08, Vu Tan wrote:
>
> > Hi Gaetan,
> > I try to generate config file by using this command tox -egenconfig on
> > top level of masakari but the output is error, is this masakari still
> > in beta version ?
> > [root at compute1 masakari-monitors]# tox -egenconfig
> > genconfig create: /root/masakari-monitors/.tox/genconfig
> > ERROR: InterpreterNotFound: python3
> > _____________________________________________________________ summary
> > ______________________________________________________________
> > ERROR:  genconfig: InterpreterNotFound: python3
> >
> > On Mon, Jul 8, 2019 at 3:24 PM Vu Tan <vungoctan252 at gmail.com> wrote:
> > Hi,
> > Thanks a lot for your reply, I install pacemaker/corosync,
> > masakari-api, maskari-engine on controller node, and I run masakari-api
> > with this command: masakari-api, but I dont know whether the process is
> > running like that or is it just hang there, here is what it shows when
> > I run the command, I leave it there for a while but it does not change
> > anything :
> > [root at controller masakari]# masakari-api
> > 2019-07-08 15:21:09.946 30250 INFO masakari.api.openstack [-] Loaded
> > extensions: ['extensions', 'notifications', 'os-hosts', 'segments',
> > 'versions']
> > 2019-07-08 15:21:09.955 30250 WARNING keystonemiddleware._common.config
> > [-] The option "__file__" in conf is not known to auth_token
> > 2019-07-08 15:21:09.955 30250 WARNING keystonemiddleware._common.config
> > [-] The option "here" in conf is not known to auth_token
> > 2019-07-08 15:21:09.960 30250 WARNING keystonemiddleware.auth_token [-]
> > AuthToken middleware is set with
> > keystone_authtoken.service_token_roles_required set to False. This is
> > backwards compatible but deprecated behaviour. Please set this to True.
> > 2019-07-08 15:21:09.974 30250 INFO masakari.wsgi [-] masakari_api
> > listening on 127.0.0.1:15868
> > 2019-07-08 15:21:09.975 30250 INFO oslo_service.service [-] Starting 4
> > workers
> > 2019-07-08 15:21:09.984 30274 INFO masakari.masakari_api.wsgi.server
> > [-] (30274) wsgi starting up on http://127.0.0.1:15868
> > 2019-07-08 15:21:09.985 30275 INFO masakari.masakari_api.wsgi.server
> > [-] (30275) wsgi starting up on http://127.0.0.1:15868
> > 2019-07-08 15:21:09.992 30277 INFO masakari.masakari_api.wsgi.server
> > [-] (30277) wsgi starting up on http://127.0.0.1:15868
> > 2019-07-08 15:21:09.994 30276 INFO masakari.masakari_api.wsgi.server
> > [-] (30276) wsgi starting up on http://127.0.0.1:15868
> >
> > On Sun, Jul 7, 2019 at 7:37 PM Gaëtan Trellu
> > <gaetan.trellu at incloudus.com> wrote:
> >
> > Hi Vu Tan,
> >
> > Masakari documentation doesn't really exist... I had to figured some
> > stuff by myself to make it works into Kolla project.
> >
> > On controller nodes you need:
> >
> > - pacemaker
> > - corosync
> > - masakari-api (openstack/masakari repository)
> > - masakari- engine (openstack/masakari repository)
> >
> > On compute nodes you need:
> >
> > - pacemaker-remote (integrated to pacemaker cluster as a resource)
> > - masakari- hostmonitor (openstack/masakari-monitor repository)
> > - masakari-instancemonitor (openstack/masakari-monitor repository)
> > - masakari-processmonitor (openstack/masakari-monitor repository)
> >
> > For masakari-hostmonitor, the service needs to have access to systemctl
> > command (make sure you are not using sysvinit).
> >
> > For masakari-monitor, the masakari-monitor.conf is a bit different, you
> > will have to configure the [api] section properly.
> >
> > RabbitMQ needs to be configured (as transport_url) on masakari-api and
> > masakari-engine too.
> >
> > Please check this review[1], you will have masakari.conf and
> > masakari-monitor.conf configuration examples.
> >
> > [1] https://review.opendev.org/#/c/615715
> >
> > Gaëtan
> >
> > On Jul 7, 2019 12:08 AM, Vu Tan <vungoctan252 at gmail.com> wrote:
> >
> > VU TAN <VUNGOCTAN252 at GMAIL.COM>
> >
> > 10:30 AM (35 minutes ago)
> >
> > to openstack-discuss
> >
> > Sorry, I resend this email because I realized that I lacked of prefix
> > on this email's subject
> >
> > Hi,
> >
> > I would like to use Masakari and I'm having trouble finding a step by
> > step or other documentation to get started with. Which part should be
> > installed on controller, which is should be on compute, and what is the
> > prerequisite to install masakari, I have installed corosync and
> > pacemaker on compute and controller nodes, , what else do I need to do
> > ?  step I have done so far:
> > - installed corosync/pacemaker
> > - install masakari on compute node on this github repo:
> > https://github.com/openstack/masakari
> > - add masakari in to mariadb
> > here is my configuration file of masakari.conf, do you mind to take a
> > look at it, if I have misconfigured anything?
> >
> > [DEFAULT]
> > enabled_apis = masakari_api
> >
> > # Enable to specify listening IP other than default
> > masakari_api_listen = controller
> > # Enable to specify port other than default
> > masakari_api_listen_port = 15868
> > debug = False
> > auth_strategy=keystone
> >
> > [wsgi]
> > # The paste configuration file path
> > api_paste_config = /etc/masakari/api-paste.ini
> >
> > [keystone_authtoken]
> > www_authenticate_uri = http://controller:5000
> > auth_url = http://controller:5000
> > auth_type = password
> > project_domain_id = default
> > user_domain_id = default
> > project_name = service
> > username = masakari
> > password = P at ssword
> >
> > [database]
> > connection = mysql+pymysql://masakari:P@ssword@controller/masakari
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20190708/c154c54b/attachment.html>


More information about the openstack-discuss mailing list