[openstack-dev] [zun] Failed to create Container

Hongbin Lu hongbin034 at gmail.com
Wed Nov 21 15:44:05 UTC 2018


Rania,

For question #1, you can do the followings in *each compute node*:

* In your kuryr config file (i.e. /etc/kuryr/kuryr.conf), change the config
[DEFAULT]kuryr_uri . For example:

[DEFAULT]
kuryr_uri = http://192.168.1.10:23750

This config decides the IP address and port that the kuryr-libnetwork
process will listen to. By default, it listens to localhost which should be
good enough for most of the cases. Therefore, change it only if it is
necessary.

* In the file: /usr/lib/docker/plugins/kuryr/kuryr.spec , change the URL so
that docker will know how to connect to kuryr-libnetwork. The value must
match the kuryr_uri config above. Again, change it only if it is necessary.

Then, restart the docker and kuryr-libnetwork process. Let me know if it
still doesn't work for you.

For question #2, I remembered all processes are running in systemd, so you
can retrieve logs by using journalctl. For example:

$ journalctl -u kuryr-libnetwork > kuryr.log
$ journalctl -u zun-compute > zun-compute.log
$ journalctl -u zun-api > zun-api.log

Best regards,
Hongbin

On Tue, Nov 20, 2018 at 9:01 PM Rania Adouni <raniaadouni at gmail.com> wrote:

> Hi Hongbin ,
> thanks for your advice I did fix it with changing the kuryr-lib to 0.6.0
> and my service just work fine and also  with lsof -iTCP -sTCP:LISTEN -P
>
> I can see it in the list  :
> *kuryr-ser 16581         root    5u  IPv4  91929      0t0  TCP
> localhost:23750 (LISTEN)*  ------------> that is great.
>
>  + but I have two questions :
>       1- How I can change the localhost to my compute address (
> 192.168.1.10:23750) because it is still the same error when trying to
> create container " Docker internal error: 500 Server Error: Internal
> Server Error ("legacy plugin: Post
> http://192.168.1.10:23750/Plugin.Activate: dial tcp 192.168.1.10:23750:
> connect: connection refused"). ?
>
>       2- my other question is about the log of zun why I can find it under
> my directory /var/log  ?
>
> Best Regards,
> Rania Adouni
>
>
> Le mer. 21 nov. 2018 à 02:34, Rania Adouni <raniaadouni at gmail.com> a
> écrit :
>
>> Hi Hongbin,
>> Yes the version of kuryr-lib is :0.8.0 , So I think I should remove it !
>> I should remove only the kuryr-lib ! if you have some command they can
>> help me to unisntall it  , it will be nice to provide it .
>>
>> Best Regards,
>> Rania
>>
>>
>> Le mer. 21 nov. 2018 à 02:27, Hongbin Lu <hongbin034 at gmail.com> a écrit :
>>
>>> Hi Rania,
>>>
>>> The config option 'driver' was recently renamed, so I guess the problem
>>> is the version of kuryr-lib is not right. The Pike release of Zun is
>>> matched to kuryr-lib 0.6.0 so you might want to confirm the version of
>>> kuryr-lib.
>>>
>>> $ sudo pip freeze | grep kuryr
>>>
>>> If the version is not right, uninstall and re-install the kuryr-lib,
>>> then restart kuryr-libnetwork. Let me know if it still doesn't work.
>>>
>>> Best regards,
>>> Hongbin
>>>
>>> On Tue, Nov 20, 2018 at 8:01 PM Rania Adouni <raniaadouni at gmail.com>
>>> wrote:
>>>
>>>> hi ,
>>>> Thanks for your reply and yes the problem that kuryr-libnetwork  is
>>>> failed to start with the error :
>>>> ● kuryr-libnetwork.service - Kuryr-libnetwork - Docker network plugin
>>>> for Neutron
>>>>    Loaded: loaded (/etc/systemd/system/kuryr-libnetwork.service;
>>>> enabled; vendor preset: enabled)
>>>>    Active: failed (Result: exit-code) since mer. 2018-11-21 01:48:48
>>>> CET; 287ms ago
>>>>   Process: 13974 ExecStart=/usr/local/bin/kuryr-server --config-file
>>>> /etc/kuryr/kuryr.conf (code=exited, status=1/FAILURE)
>>>>  Main PID: 13974 (code=exited, status=1/FAILURE)
>>>>
>>>> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542
>>>> 13974 ERROR kuryr     value = self._do_get(name, group, namespace)
>>>> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542
>>>> 13974 ERROR kuryr   File
>>>> "/usr/lib/python2.7/dist-packages/oslo_config/cfg.py", line 2942, in _
>>>> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542
>>>> 13974 ERROR kuryr     info = self._get_opt_info(name, group)
>>>> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542
>>>> 13974 ERROR kuryr   File
>>>> "/usr/lib/python2.7/dist-packages/oslo_config/cfg.py", line 3099, in _
>>>> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542
>>>> 13974 ERROR kuryr     raise NoSuchOptError(opt_name, group)
>>>> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542
>>>> 13974 ERROR kuryr NoSuchOptError: no such option driver in group [binding]
>>>> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542
>>>> 13974 ERROR kuryr
>>>> nov. 21 01:48:48 compute systemd[1]: kuryr-libnetwork.service: Main
>>>> process exited, code=exited, status=1/FAILURE
>>>> nov. 21 01:48:48 compute systemd[1]: kuryr-libnetwork.service: Unit
>>>> entered failed state.
>>>> nov. 21 01:48:48 compute systemd[1]: kuryr-libnetwork.service: Failed
>>>> with result 'exit-code'.
>>>>
>>>>
>>>> and also the command lsof -iTCP -sTCP:LISTEN -P doesn't show the kuryr
>>>> service :
>>>> COMMAND    PID         USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
>>>> dockerd   1144         root    5u  IPv4  20120      0t0  TCP
>>>> compute:2375 (LISTEN)
>>>> sshd      1288         root    3u  IPv4  19532      0t0  TCP *:22
>>>> (LISTEN)
>>>> sshd      1288         root    4u  IPv6  19534      0t0  TCP *:22
>>>> (LISTEN)
>>>> dnsmasq   1961       nobody    6u  IPv4  23450      0t0  TCP
>>>> 192.168.122.1:53 (LISTEN)
>>>> sshd      4163       adouni    9u  IPv6  34950      0t0  TCP
>>>> localhost:6010 (LISTEN)
>>>> sshd      4163       adouni   10u  IPv4  34951      0t0  TCP
>>>> localhost:6010 (LISTEN)
>>>> qemu-syst 4621 libvirt-qemu   18u  IPv4  37121      0t0  TCP *:5900
>>>> (LISTEN)
>>>>
>>>> !!!
>>>>
>>>>
>>>> Le mer. 21 nov. 2018 à 01:45, Jacob Burckhardt <
>>>> jburckhardt at pdvwireless.com> a écrit :
>>>>
>>>>> Your error message says it cannot connect to port 23750.  That's the
>>>>> kuryr-libnetwork default listen port.  On 192.168.1.10, run:
>>>>>
>>>>>
>>>>>
>>>>> lsof -iTCP -sTCP:LISTEN -P
>>>>>
>>>>>
>>>>>
>>>>> On my compute node, it outputs:
>>>>>
>>>>>
>>>>>
>>>>> COMMAND    PID        USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
>>>>>
>>>>>>>>>>
>>>>> kuryr-ser 1976        root    6u  IPv4  30896      0t0  TCP
>>>>> localhost:23750 (LISTEN)
>>>>>
>>>>>
>>>>>
>>>>> So, you can see that kuryr is listening on 23750.  If lsof does not
>>>>> list a process listening on 23750, then check if kuryr is up by running:
>>>>>
>>>>>
>>>>>
>>>>> systemctl status kuryr-libnetwork
>>>>>
>>>>>
>>>>>
>>>>> You can also try restarting it by running:
>>>>>
>>>>>
>>>>>
>>>>> systemctl restart kuryr-libnetwork
>>>>>
>>>>>
>>>>>
>>>>> I installed that service by following:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> https://docs.openstack.org/kuryr-libnetwork/queens/install/compute-install-ubuntu.html
>>>>>
>>>>>
>>>>>
>>>>> That is the queens install guide which might help you since zun has no
>>>>> install guide in pike.
>>>>>
>>>>>
>>>>>
>>>>> If you see it listening, you can try this command:
>>>>>
>>>>>
>>>>>
>>>>> telnet 192.168.1.10 23750
>>>>>
>>>>>
>>>>>
>>>>> If it fails to connect, then try:
>>>>>
>>>>>
>>>>>
>>>>> telnet localhost 23750
>>>>>
>>>>>
>>>>>
>>>>> If it works with localhost but not 192.168.1.10, then I think that
>>>>> means you need to tell docker to connect to localhost instead of
>>>>> 192.168.1.10.
>>>>>
>>>>>
>>>>>
>>>>> Can you get the commands at the following web page to succeed?
>>>>>
>>>>>
>>>>>
>>>>> https://docs.openstack.org/kuryr-libnetwork/queens/install/verify.html
>>>>>
>>>>>
>>>>>
>>>>> *Jacob Burckhardt*
>>>>>
>>>>> Senior Software Engineer
>>>>>
>>>>> [image: pdvWireless]
>>>>>
>>>>>
>>>>>
>>>>> *From:* Rania Adouni <raniaadouni at gmail.com>
>>>>> *Sent:* Tuesday, November 20, 2018 2:02 PM
>>>>> *To:* openstack-dev at lists.openstack.org
>>>>> *Subject:* [openstack-dev] [zun] Failed to create Container
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Hi ,
>>>>>
>>>>>
>>>>>
>>>>> I am starting to use zun on openstack pike , and when I try to lunch
>>>>> container with cirros image , I get this reason : Docker internal
>>>>> error: 500 Server Error: Internal Server Error ("legacy plugin: Post
>>>>> http://192.168.1.10:23750/Plugin.Activate: dial tcp 192.168.1.10:23750:
>>>>> connect: connection refused").
>>>>>
>>>>> you can find here the log on my compute node :
>>>>> https://pastebin.com/nZTiTZiV.
>>>>>
>>>>> some help with this will be great .
>>>>>
>>>>> Best Regards,
>>>>>
>>>>> Rania Adouni
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> __________________________________________________________________________
>>>>> OpenStack Development Mailing List (not for usage questions)
>>>>> Unsubscribe:
>>>>> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>>>
>>>>
>>>> __________________________________________________________________________
>>>> OpenStack Development Mailing List (not for usage questions)
>>>> Unsubscribe:
>>>> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>>
>>>
>>> __________________________________________________________________________
>>> OpenStack Development Mailing List (not for usage questions)
>>> Unsubscribe:
>>> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>
>> __________________________________________________________________________
> OpenStack Development Mailing List (not for usage questions)
> Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20181121/3ef32587/attachment-0001.html>
-------------- next part --------------
__________________________________________________________________________
OpenStack Development Mailing List (not for usage questions)
Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev


More information about the openstack-discuss mailing list