<font size=2 face="sans-serif">Hi Victor,</font>
<br>
<br><font size=2 face="sans-serif">Thank you very much for your detailed
response. It was very helpful.</font>
<br>
<br><font size=2 face="sans-serif">I tried the approach you suggested,
and modified the local.conf file by adding these lines:</font>
<br>
<br><font size=2 face="sans-serif">MURANO_REPO=/home/stack/workspace/murano</font>
<br><font size=2 face="sans-serif">enable_plugin murano </font><a href=https://github.com/openstack/murano><font size=2 color=blue face="sans-serif">https://github.com/openstack/murano</font></a>
<br>
<br><font size=2 face="sans-serif">And changed the plugin.sh file back
to original. However, with a cleaned devstack (./unstack.sh, ./clean.sh,
and removed /opt/stack) I still got the error I mentioned in my previous
post. Full stack log is attached.</font>
<br>
<br>
<br>
<br><font size=2 face="sans-serif">As per your suggestion I was going to
test your first suggestion, but I was unable to find any murano service
running on my server after the completion of ./stack.sh (which I tested
installed murano with it).</font>
<br><font size=2 face="sans-serif">The command "sudo service murano
status" returns "murano: unrecognized service".</font>
<br><font size=2 face="sans-serif">Am I missing something?<br>
</font>
<br><font size=2 face="sans-serif">Thanks again for your assistance.</font>
<br><font size=2 face="sans-serif"><br>
Regards,</font><font size=3><br>
-----------------------------------------------------------------------------</font>
<table width=463 style="border-collapse:collapse;">
<tr valign=top height=8>
<td width=264 style="border-style:none none none none;border-color:#000000;border-width:0px 0px 0px 0px;padding:0px 0px;"><font size=2 color=blue face="Calibri"><b>Vahid
Hashemian, Ph.D.</b></font><font size=2 face="Calibri"><br>
Advisory Software Engineer, IBM Cloud Labs<br>
Email: vahidhashemian@us.ibm.com<br>
Phone: 1-408-463-2380</font>
<td width=199 style="border-style:none none none none;border-color:#000000;border-width:0px 0px 0px 0px;padding:0px 0px;">
<div align=right><font size=2 face="Calibri"><br>
IBM Silicon Valley Lab<br>
555 Bailey Ave.<br>
San Jose, CA 95141</font></div></table>
<br>
<br>
<br>
<br>
<br><font size=1 color=#5f5f5f face="sans-serif">From:
</font><font size=1 face="sans-serif">Victor Ryzhenkin <vryzhenkin@mirantis.com></font>
<br><font size=1 color=#5f5f5f face="sans-serif">To:
</font><font size=1 face="sans-serif">Vahid S Hashemian/Silicon
Valley/IBM@IBMUS, "OpenStack Development Mailing List (not for usage
questions)" <openstack-dev@lists.openstack.org></font>
<br><font size=1 color=#5f5f5f face="sans-serif">Date:
</font><font size=1 face="sans-serif">08/25/2015 05:47 PM</font>
<br><font size=1 color=#5f5f5f face="sans-serif">Subject:
</font><font size=1 face="sans-serif">Re: [openstack-dev]
[Murano] Documentation on how to Start Contributing</font>
<br>
<hr noshade>
<br>
<br>
<br><font size=2 face="Arial">Hi, Vahid!</font>
<br>
<br>
<br><font size=2 face="sans-serif">- Modified /home/stack/workspace/murano/devstack/plugin.sh
based on Gosha's suggestion and replaced</font><font size=2 face="Arial">
</font><font size=2 color=blue face="sans-serif">MURANO_REPO=${MURANO_REPO:-${GIT_BASE}/openstack/murano.git}</font><font size=2 face="sans-serif">with</font><font size=2 face="Arial">
</font><font size=2 color=blue face="sans-serif">MURANO_REPO=/home/stack/workspace/murano</font><font size=2 face="sans-serif">.</font>
<br>
<br><font size=2 face="Arial">Unfortunately, I’m not sure, that using
local path as MURANO_REPO will work. At least, because I never heard about
use cases like this.</font>
<br><font size=2 face="Arial">But looks like you are given it a try. So,
I suggest you to make sure, that you executed ./unstack and ./clean.sh
scripts, before start deployment. If you using clean host, this one not
needed.</font>
<br><font size=2 face="Arial">Also, I think that is not needed to change
plugin’s code. You can define MURANO_REPO=/home/stack/… in your localrc/local.conf
file and use </font>
<br><font size=2>"enable_plugin murano </font><a href=https://github.com/openstack/murano><font size=2 color=blue><u>https://github.com/openstack/murano</u></font></a><font size=2>»</font>
<br>
<br><font size=2>What about suggestions, how to test your local changes.
</font>
<br><font size=2>I see a two easy ways to do it without using local repositories.</font>
<br><font size=2>1. Deploy devstack with murano from master as is using
plugin or libs and replace old files in /opt/stack/murano with new ones,
that you changed. After this need to restart murano services.</font>
<br><font size=2>2. Upload your changes to gerrit, and use as MURANO_REPO=</font><a href=https://review.openstack.org/openstack/murano><font size=2 color=blue face="Times New Roman"><u>https://review.openstack.org/openstack/murano</u></font></a><font size=2 face="Arial">
and MURANO_BRANCH=<refs/changes/…/.../…>. </font>
<br>
<br><font size=2 face="Arial">Both of methods are good.</font>
<br>
<br><font size=2 face="sans-serif">But this errors on me when I run ./stack.sh:<br>
ERROR: openstack Conflict occurred attempting
to store user - Duplicate Entry (HTTP 409) (Request-ID: req-805b487c-44fe-4155-8349-65362c2a34ee)</font>
<p><font size=2 face="Arial">It will be really good, if you can give more
information (I mean full, or last part of deployment log)</font>
<p><font size=2 face="Arial">Best Regards!</font>
<br><font size=2 face="Arial">-- <br>
Victor Ryzhenkin</font>
<br><font size=2 face="Arial">Junior QA Engeneer</font>
<br><font size=2 face="Arial">freerunner on #freenode</font>
<br>
<p><font size=2 face="Arial">Включено 26 августа 2015 г.
в 2:49:46, Vahid S Hashemian (</font><a href=mailto:vahidhashemian@us.ibm.com><font size=2 color=blue face="Arial"><u>vahidhashemian@us.ibm.com</u></font></a><font size=2 face="Arial">)
написал:</font>
<p><font size=2 face="sans-serif">OK. So I'm still having some issues with
this.</font><font size=2 face="Arial"><br>
</font><font size=2 face="sans-serif"><br>
Here's what I have done:</font><font size=2 face="Arial"><br>
</font><font size=2 face="sans-serif"><br>
- Followed instructions on</font><font size=2 face="Arial"> </font><a href=http://murano.readthedocs.org/en/latest/install/development.html><font size=2 color=blue face="sans-serif"><u>http://murano.readthedocs.org/en/latest/install/development.html</u></font></a><font size=2 face="sans-serif">up
to step 4<br>
* cloned murano into /home/stack/workspace/murano<br>
* cloned devstack into /home/stack/devstack</font><font size=2 face="Arial"><br>
</font><font size=2 face="sans-serif"><br>
- Modified /home/stack/workspace/murano/devstack/plugin.sh based on Gosha's
suggestion and replaced</font><font size=2 face="Arial"> </font><font size=2 color=blue face="sans-serif">MURANO_REPO=${MURANO_REPO:-${GIT_BASE}/openstack/murano.git}</font><font size=2 face="sans-serif">with</font><font size=2 face="Arial">
</font><font size=2 color=blue face="sans-serif">MURANO_REPO=/home/stack/workspace/murano</font><font size=2 face="sans-serif">.</font><font size=2 face="Arial"><br>
</font><font size=2 face="sans-serif"><br>
- Modified /home/stack/devstack/local.conf and added</font><font size=2 face="Arial">
</font><font size=2 color=blue face="sans-serif">enable_plugin murano /home/stack/workspace/murano</font><font size=2 face="Arial"><br>
</font><font size=2 face="sans-serif"><br>
But this errors on me when I run ./stack.sh:<br>
ERROR: openstack Conflict occurred attempting
to store user - Duplicate Entry (HTTP 409) (Request-ID: req-805b487c-44fe-4155-8349-65362c2a34ee)</font><font size=2 face="Arial"><br>
</font><font size=2 face="sans-serif"><br>
I appreciate some clarification. Thanks.<br>
<br>
Regards,</font><font size=3 face="Arial"><br>
-----------------------------------------------------------------------------</font><font size=2 face="Arial">
</font>
<table width=463 style="border-collapse:collapse;">
<tr valign=top height=8>
<td width=261 style="border-style:none none none none;border-color:#000000;border-width:0px 0px 0px 0px;padding:1px 1px;"><font size=2 color=blue face="Calibri"><b>Vahid
Hashemian, Ph.D.</b></font><font size=2 face="Calibri"><br>
Advisory Software Engineer, IBM Cloud Labs</font>
<td width=197 style="border-style:none none none none;border-color:#000000;border-width:0px 0px 0px 0px;padding:1px 1px;"></table>
<br><font size=2 face="Arial"><br>
<br>
<br>
<br>
</font><font size=1 color=#5f5f5f face="sans-serif"><br>
From: </font><font size=1 face="sans-serif">Vahid
S Hashemian/Silicon Valley/IBM@IBMUS</font><font size=1 color=#5f5f5f face="sans-serif"><br>
To: </font><font size=1 face="sans-serif">"OpenStack
Development Mailing List \(not for usage questions\)" <openstack-dev@lists.openstack.org></font><font size=1 color=#5f5f5f face="sans-serif"><br>
Date: </font><font size=1 face="sans-serif">07/10/2015
04:02 PM</font><font size=1 color=#5f5f5f face="sans-serif"><br>
Subject: </font><font size=1 face="sans-serif">Re:
[openstack-dev] [Murano] Documentation on how to Start
Contributing</font><font size=2 face="Arial"><br>
</font>
<hr noshade><font size=2 face="Arial"><br>
<br>
</font><font size=2 face="sans-serif"><br>
Thanks Nikolay and Gosha.<br>
<br>
As Gosha mentioned I'd like to be able to integrate my local changes to
Murano into my devstack installation.</font><font size=2 face="Arial">
</font><font size=2 face="sans-serif"><br>
I figured for UI changes I can probably make the changes directly to the
file and restart my apache2 service.</font><font size=2 face="Arial"> </font><font size=2 face="sans-serif"><br>
However, I am looking for an easy way to test back-end changes, like if
I had to modify how a particular CLI behaves, and test it in my devstack
environment.<br>
<br>
Gosha, thanks for the info you sent. Can you clarify something though?<br>
<br>
In local.conf there is a line "enable_plugin murano</font><font size=2 face="Arial">
</font><a href=https://github.com/openstack/murano><font size=2 color=blue face="sans-serif"><u>https://github.com/openstack/murano</u></font></a><font size=2 face="sans-serif">"
pointing to the Murano's github repository.</font><font size=2 face="Arial">
</font><font size=2 face="sans-serif"><br>
In plugin.sh, on the other hand, there is a line "MURANO_REPO=${MURANO_REPO:-${GIT_BASE}/openstack/murano.git}"
that also another configuration for Murano repository.<br>
Are these two related? Should I modify both for the purpose I mentioned
above?</font><font size=2 face="Arial"> </font><font size=2 face="sans-serif"><br>
Also, I cannot find a "murano.git" file on my server (as referenced
in line 17 of plugin.sh). Should I use something like "/home/stack/murano/.git"
instead?</font><font size=2 face="Arial"> </font><font size=2 face="sans-serif"><br>
<br>
Thank you again for your help.</font><font size=2 face="Arial"> </font><font size=2 face="sans-serif"><br>
<br>
Regards,</font><font size=3 face="Arial"><br>
-----------------------------------------------------------------------------</font><font size=2 face="Arial">
</font>
<table width=462 style="border-collapse:collapse;">
<tr valign=top height=8>
<td width=261 style="border-style:none none none none;border-color:#000000;border-width:0px 0px 0px 0px;padding:1px 1px;"><font size=2 color=blue face="Calibri"><b>Vahid
Hashemian, Ph.D.</b></font><font size=2 face="Calibri"><br>
Advisory Software Engineer, IBM Cloud Labs</font>
<td width=197 style="border-style:none none none none;border-color:#000000;border-width:0px 0px 0px 0px;padding:1px 1px;"></table>
<br><font size=3 face="Arial"><br>
<br>
<br>
<br>
</font><font size=1 color=#5f5f5f face="sans-serif"><br>
<br>
From: </font><font size=1 face="sans-serif">Georgy
Okrokvertskhov <gokrokvertskhov@mirantis.com></font><font size=1 color=#5f5f5f face="sans-serif"><br>
To: </font><font size=1 face="sans-serif">"OpenStack
Development Mailing List (not for usage questions)" <openstack-dev@lists.openstack.org></font><font size=1 color=#5f5f5f face="sans-serif"><br>
Date: </font><font size=1 face="sans-serif">07/10/2015
07:45 AM</font><font size=2 face="Arial"> </font><font size=1 color=#5f5f5f face="sans-serif"><br>
Subject: </font><font size=1 face="sans-serif">Re:
[openstack-dev] [Murano] Documentation on how to Start
Contributing</font><font size=2 face="Arial"> <br>
</font>
<hr noshade><font size=3 face="Arial"><br>
<br>
<br>
Hi,<br>
<br>
If I understand correctly, you want to be able to install modified Murano
from your own repository. There is a devstack integration script in Murano
repository which does this. Here are lines where you can point to specific
repository for Murano installation in devstack:</font><font size=2 face="Arial">
</font><a href="https://github.com/openstack/murano/blob/master/devstack/plugin.sh#L17-L18"><font size=3 color=blue face="Arial"><u>https://github.com/openstack/murano/blob/master/devstack/plugin.sh#L17-L18</u></font></a><font size=3 face="Arial"><br>
<br>
Installation procedure in the README.rst file in the folder devstack of
murano repository.<br>
<br>
Thanks<br>
Gosha<br>
<br>
On Thu, Jul 9, 2015 at 9:54 PM, Nikolay Starodubtsev <</font><a href=mailto:nstarodubtsev@mirantis.com target=_blank><font size=3 color=blue face="Arial"><u>nstarodubtsev@mirantis.com</u></font></a><font size=3 face="Arial">>
wrote:<br>
Hi,<br>
Can you describe what problems do you have with "bring code changes
into a live Devstack environment, and test them".<br>
If you want a real-time Q&A experience you can ask your questions at
#murano on freenode.</font><font size=2 color=#2f2f2f face="Arial"><b><u><br>
<br>
</u></b><br>
Nikolay Starodubtsev</font><font size=2 face="Arial"> </font><font size=2 color=#2f2f2f face="Arial"><br>
Software Engineer</font><font size=2 face="Arial"> </font><font size=2 color=#2f2f2f face="Arial"><br>
Mirantis Inc.</font><font size=2 face="Arial"> </font><font size=2 color=#2f2f2f face="Arial"><br>
<br>
Skype: dark_harlequi</font><font size=2 color=#8f8f8f face="Arial">ne1</font><font size=2 face="Arial">
</font>
<p><font size=3 face="Arial"><br>
2015-07-10 2:32 GMT+03:00 Vahid S Hashemian <</font><a href=mailto:vahidhashemian@us.ibm.com target=_blank><font size=3 color=blue face="Arial"><u>vahidhashemian@us.ibm.com</u></font></a><font size=3 face="Arial">>:</font><font size=2 face="Arial">
</font><font size=2 face="sans-serif"><br>
Hello,</font><font size=2 face="Arial"> </font><font size=2 face="sans-serif"><br>
<br>
I am wondering if there is any documentation for new contributors that
explains how to get up-to-speed with Murano development; something that
covers how to bring code changes into a live Devstack environment, and
test them.</font><font size=2 face="Arial"> </font><font size=2 face="sans-serif"><br>
I've looked at the Murano documentation online and have not been able to
find it.</font><font size=2 face="Arial"> </font><font size=2 face="sans-serif"><br>
<br>
Any pointer is very much appreciated.<br>
<br>
Thanks.</font><font size=2 face="Arial"> </font><font size=3 face="Arial"><br>
-----------------------------------------------------------------------------</font>
<p>
<table width=462 style="border-collapse:collapse;">
<tr valign=top height=8>
<td width=261 style="border-style:none none none none;border-color:#000000;border-width:0px 0px 0px 0px;padding:1px 1px;"><font size=2 color=blue face="Calibri"><b>Vahid
Hashemian, Ph.D.</b></font><font size=2 face="Calibri"><br>
Advisory Software Engineer, IBM Cloud Labs</font>
<td width=197 style="border-style:none none none none;border-color:#000000;border-width:0px 0px 0px 0px;padding:1px 1px;"></table>
<p><font size=3 face="Arial"><br>
<br>
<br>
__________________________________________________________________________<br>
OpenStack Development Mailing List (not for usage questions)<br>
Unsubscribe:</font><font size=2 face="Arial"> </font><a href="http://OpenStack-dev-request@lists.openstack.org?subject:unsubscribe" target=_blank><font size=3 color=blue face="Arial"><u>OpenStack-dev-request@lists.openstack.org?subject:unsubscribe</u></font></a><font size=2 color=blue face="Arial"><u><br>
</u></font><a href="http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev" target=_blank><font size=3 color=blue face="Arial"><u>http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev</u></font></a><font size=3 face="Arial"><br>
<br>
<br>
<br>
__________________________________________________________________________<br>
OpenStack Development Mailing List (not for usage questions)<br>
Unsubscribe:</font><font size=2 face="Arial"> </font><a href="http://OpenStack-dev-request@lists.openstack.org?subject:unsubscribe" target=_blank><font size=3 color=blue face="Arial"><u>OpenStack-dev-request@lists.openstack.org?subject:unsubscribe</u></font></a><font size=2 color=blue face="Arial"><u><br>
</u></font><a href="http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev" target=_blank><font size=3 color=blue face="Arial"><u>http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev</u></font></a><font size=3 face="Arial"><br>
<br>
<br>
<br>
<br>
--</font><font size=2 face="Arial"> </font><font size=3 color=#a2a2a2 face="Arial"><br>
Georgy Okrokvertskhov<br>
Architect,</font><font size=2 color=#a2a2a2 face="Arial"><br>
OpenStack Platform Products,</font><font size=3 color=#a2a2a2 face="Arial"><br>
Mirantis</font><font size=2 color=blue face="Arial"><u><br>
</u></font><a href=http://www.mirantis.com/ target=_blank><font size=3 color=blue face="Arial"><u>http://www.mirantis.com</u></font></a><font size=3 color=#a2a2a2 face="Arial"><br>
Tel. +1 650 963 9828<br>
Mob. +1 650 996 3284</font><font size=2 face="Arial">__________________________________________________________________________<br>
OpenStack Development Mailing List (not for usage questions)<br>
Unsubscribe: OpenStack-dev-request@lists.openstack.org?subject:unsubscribe</font><font size=2 color=blue face="Arial"><u><br>
</u></font><a href="http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev"><font size=2 color=blue face="Arial"><u>http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev</u></font></a><font size=2 face="Arial"><br>
__________________________________________________________________________<br>
OpenStack Development Mailing List (not for usage questions)<br>
Unsubscribe: OpenStack-dev-request@lists.openstack.org?subject:unsubscribe</font><font size=2 color=blue face="Arial"><u><br>
</u></font><a href="http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev"><font size=2 color=blue face="Arial"><u>http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev</u></font></a>
<p><font size=2 face="Arial">__________________________________________________________________________
<br>
OpenStack Development Mailing List (not for usage questions) <br>
Unsubscribe: OpenStack-dev-request@lists.openstack.org?subject:unsubscribe
<br>
</font><a href="http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev"><font size=2 face="Arial">http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev</font></a><font size=2 face="Arial">
</font>
<p>