Open Stack

Both OpenWRT or Cirros images just brings up their first interface (eth0)
to automatically do DHCP (client). Either case, please reach out to us in
the #tacker IRC channel to get some help resolving this issue.

On Mon, Aug 29, 2016 at 5:27 AM, Abhilash Goyal <abhilashgoyal4 at gmail.com>
wrote:

> Default cirros that is added at the time of installation.
> On 29 Aug 2016 16:25, "Zhi Chang" <changzhi at unitedstack.com> wrote:
>
>> My cirros image works ok. What version about your cirros image?
>>
>>
>> ------------------ Original ------------------
>> *From: * "Abhilash Goyal"<abhilashgoyal4 at gmail.com>;
>> *Date: * Mon, Aug 29, 2016 06:43 PM
>> *To: * "OpenStack Development Mailing List (not for usage questions)"<
>> openstack-dev at lists.openstack.org>;
>> *Subject: * Re: [openstack-dev] tacker vnf-create is not bringing
>> upalltheinterfaces
>>
>> Hello Chang,
>> thanks a lot, this image worked. Could you guide me the same for cirros
>> image.
>>
>>
>> On Mon, Aug 29, 2016 at 2:54 PM, Zhi Chang <changzhi at unitedstack.com>
>> wrote:
>>
>>> OpenWRT image should be enabled first nic's DHCP.
>>>
>>>
>>> ------------------ Original ------------------
>>> *From: * "Abhilash Goyal"<abhilashgoyal4 at gmail.com>;
>>> *Date: * Mon, Aug 29, 2016 05:35 PM
>>> *To: * "OpenStack Development Mailing List (not for usage questions)"<
>>> openstack-dev at lists.openstack.org>;
>>> *Subject: * Re: [openstack-dev] tacker vnf-create is not bringing up
>>> alltheinterfaces
>>>
>>> Hi Chang,
>>>
>>> I am using https://downloads.openwrt.org/chaos_calmer/15.05/x86/k
>>> vm_guest/openwrt-15.05-x86-kvm_guest-combined-ext4.img.gz image of
>>> openWRT.
>>> This feature is not working for Cirros either.
>>>
>>> On Mon, Aug 29, 2016 at 2:25 PM, Zhi Chang <changzhi at unitedstack.com>
>>> wrote:
>>>
>>>> Hi, Goyal.
>>>>
>>>>     What version about your OpenWRT image? You can get OpenWRT image
>>>> from  this: https://drive.google.com/open?id=0B-ruQ8Tx46wSMktKV3J
>>>> LRWhnLTA
>>>>
>>>>
>>>> Thanks
>>>> Zhi Chang
>>>>
>>>> ------------------ Original ------------------
>>>> *From: * "Abhilash Goyal"<abhilashgoyal4 at gmail.com>;
>>>> *Date: * Mon, Aug 29, 2016 05:18 PM
>>>> *To: * "openstack-dev"<openstack-dev at lists.openstack.org>;
>>>> *Subject: * [openstack-dev] tacker vnf-create is not bringing up all
>>>> theinterfaces
>>>>
>>>> [Tacker]
>>>> Hello team,
>>>> I am trying to make an OpenWRT VNF through tacker using this vnf-d
>>>> <https://github.com/openstack/tacker/blob/master/samples/tosca-templates/vnfd/tosca-vnfd-openwrt.yaml>.
>>>> VNF is spawning successfully, but expected VNF should have 3 connecting
>>>> points with first one in management network, but this is not happening. It
>>>> is getting up with default network configuration because of this, IPs are
>>>> not getting assigned to it automatically.
>>>> Guidance would be appreciated.
>>>>
>>>> --
>>>> Abhilash Goyal
>>>>
>>>>
>>>> ____________________________________________________________
>>>> ______________
>>>> OpenStack Development Mailing List (not for usage questions)
>>>> Unsubscribe: OpenStack-dev-request at lists.op
>>>> enstack.org?subject:unsubscribe
>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>>
>>>>
>>>
>>>
>>> --
>>> Abhilash Goyal
>>>
>>>
>>> ____________________________________________________________
>>> ______________
>>> OpenStack Development Mailing List (not for usage questions)
>>> Unsubscribe: OpenStack-dev-request at lists.op
>>> enstack.org?subject:unsubscribe
>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>
>>>
>>
>>
>> --
>> Abhilash Goyal
>>
>>
>> ____________________________________________________________
>> ______________
>> OpenStack Development Mailing List (not for usage questions)
>> Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscrib
>> e
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>
>>
> __________________________________________________________________________
> OpenStack Development Mailing List (not for usage questions)
> Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20160831/2460c815/attachment.html>